รหัสสินค้า : 17573 K

Minisart® SRP15 Syringe Filter 17573----------K, 0.2 µm hydrophobic PTFE

Minisart® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.

Item no.:  17573----------K

Availability (ex works):  On Request

Non-sterile Minisart® SRP syringe filters are supplied in a pouch in one pack. This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The low-binding PTFE membrane is the best option for leachable free filtration whenever highest chemical compatibility and pH values of 1 - 14 are needed. For hydrophilic solutions pre-rinsing with a solvent is necessary to make the hydrophobic membrane permeable for aqueous liquids. Due to the hydrophobic nature Minisart SRP can also be used for venting. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.

• A pouch in one pack for less waste
• Minimum extractables or leachables
• Highest chemical compatibility
• Suitable as venting filter

Bubble Point

• Min. value with ethanol 1.1 bar (16 psi)

Burst Pressure

• Min. value 7.0 bar (102 psi)

Connector Inlet

• Female Luer Lock

Connector Outlet

• Male Luer Slip

Delivery Condition

• Non-Sterile

Device Type

• Syringe Filters

Filtration Area

• 1.7 cm²

Flow Rate

• 55 mL/min with methanol at 1 bar (14.5 psi) | 800 mL/min with air at 0.1 bar (1.5 psi)

High Flow

• No

Hold-up Volume

• 30 – 100 µL before bubble point

Housing Dimensions

• 25 × 23 mm

Housing Material

• Polypropylene (PP)

Maximum Allowable Working Temperature

• 121 °C (250 °F)

Maximum Operating Pressure

• 4.5 bar (65 psi)

Membrane Material

• Polytetrafluorethylene (PTFE)

Non-Fiber Releasing

• This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.

Operating Pressure

• 4.5 bar (65 psi)

Pore Size

• 0.2 µm

Sample Type

• Solvents
• Harsh liquids
• Air/Gas

Sterilization Method

• Ethylene oxide
• Autoclave

Sterilization Procedures

• Ethylene oxide
• Autoclave, 121°C, 30 min

Total Throughput

• Up to 15 mL

Wettability

• Hydrophobic

pH Range

• 1.0 – 14.0

Application Area

• Sterile Filtration
• Analytical Sample Preparation
• Clarification

Filter Diameter

• ⌀ 15 mm

Filter Paper/Membrane Color

• White (opaque)

Application

• HPLC

Biosafety

• All materials of this filter element meet the requirements of the current USP Biological Reactivity tests for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).

Cytotoxicity

• According to ISO 10993-5

Extractables

• HPLC certified

Pack Size

• 50

Packaging

• Bulk pouch packed