รหัสสินค้า : 17805G

Midisart® 2000 PTFE

The Midisart® family for small venting applications offers maximum handling ease, flexibility and safety. Ready-to-use filters with high flow PTFE membranes and 100% integrity tested. Midisart® BV are gamma-stable. Available with different connectors.

Item no.:  17805G

Midisart® filters are available with PTFE (autoclavable) membrane. Ready-to-use, 100 % integrity tested and fully validated

• Brand: Midisart®
• Filter Type: Air/Gas/Solvent Filters
• Packaging: Sterile, individually packed
• Sterilization Method: Autoclavable
• Pore Size Final-filter: 0.2 µm

Specifications 

Filter material: PTFE reinforced with polypropylene gauze 

Housing material: Polypropylene 

Filtration area: 20 cm2 

Housing diameter: 64 mm 

Priming volume: approx. 3 mL 

Hold-up volume: approx. 1 mL before, 0.5 mL after bubble point 

Max. operating pressure: 300 kPa (3 bar) 

Water penetration point: approx. 300 kPa (0.45 µm), 400 kPa (0.2 µm) 

Max. temperature (autoclave): 134°C 

Presterilized with: Ethylene oxide 

Biosafety: Materials pass USPXXII Plastics class VI 

Bubble point (isopropanol, 60 %): 0.45 µm: >0.9 bar 0.2 µm: >1.1 bar 

Conncetions: Inlet and outlet: Conical hose nipple for hoses with an inner diameter of 6–12 mm,

modified hose nipple for hoses with an inner diameter of 4–12 mm, or Inlet and outlet: 1/8” NPT thread  

The Midisart® filter family is the clear choice for small scale sterile air/gas filtration applications. Superior flow rates and seamless integration into single-use assemblies provide Midisart® customers with a distinct advantage that directly translates into cost savings. 100% factory integrity testing of both the autoclavable Midisart® 2000 and the gamma-irradiatable (or autoclavable) Midisart® BV ensures inherent quality in every filter prior to use. Moreover our state of the art production-lines ensure a quick and reliable supply at any time. Various combinations of four different connector types provide unmet flexibility.- 100 % Integrity Testing: Each Midisart® is integrity tested after manufacturing- Gamma-irradiatable: Midisart® BV resists gamma irradiation up to 50 kGy- Perfect Traceability: Clear filter identification through optimized product labeling- Assurance of Supply: High capacities due to modern production-lines- Connectivity: Various connector types/combinations- Economic integrity testing: Timesaving by parallel testing using our Test ManifoldApplications- Filling and transfer vessels- Holding and storage tanks for sterile media- Autoclaves- Small (single-use) fermenters- Disposable bags/bottles and tubing systems- Carboys- Solvent filtration

Bacterial Retention

• Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology

Capsule/Cartridge Format

• Flat Disc Capsules

Connector Inlet

• Multiple Stepped Hose Barb

Connector Outlet

• Multiple Stepped Hose Barb

Filter Format

• Capsules

Filter Type

• Air/Gas Filters

Filtration Area

• 20 cm²

Housing Material

• Polypropylene (PP)

Industry

• Pharma / Biotech

Maximum Differential Pressure

• 3 bar

Maximum Operating Pressure

• 3 bar (44 psi)

Membrane Material

• Polytetrafluorethylene (PTFE)

Minimum Required Bubble Point

• 1.1 bar | 15.95 psi

Sterilization Method

• Autoclavable

Sterilization Procedures

• Autoclaving: max. 20 cycles at max. 134 °C, 2 bar | 29 psi

Sterilizing Grade

• No

Type

• Air filter

Bacterial Endotoxins

• < 0.18 EU/mL as determined by the LAL test

Biosafety

• All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).

Extractables

• The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".

GMP Compliance

• This product was manufactured in conformance with established Current Good Manufacturing Practice (cGMP) standards.

Packaging

• Sterile, individually packed