ตู้บ่มเพาะเชื้อ Incubator รุ่น IF75, ขนาด 74 ลิตร , ยี่ห้อ MEMMERT
รหัสสินค้า : IF75
ราคา |
111,280.00 ฿ |
จำนวนที่จะซื้อ | |
ราคารวม | 111,280.00 ฿ |
สินค้าไม่เพียงพอ
สินค้าหมด
Incubator IF75
Standard delivery Incubator
The heating of this incubator is optimally tuned for forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.
Temperature
Setting temperature range : +20 to +80 °C
Working temperature range : min. 10°C above ambient up to +80°C
Setting accuracy temperature : 0.1 °C
Temperature sensor : 1 Pt100 sensor DIN class A in 4-wire-circuit
Control technology
Language setting : German, English, Spanish, French, Polish, Czech, Hungarian
ControlCOCKPIT : SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
Timer : Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT : the process time does not start until the set temperature is reached
Calibration : three freely selectable temperature values
adjustable parameters : temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime
Ventilation
Fan : forced air circulation by quiet air turbine, adjustable in 10 % steps
Fresh air : Admixture of pre-heated fresh air by electronically adjustable air flap
Vent : vent connection with restrictor flap
Communication
Documentation : programme stored in case of power failure
Programming : AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
Safety
Temperature control : adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system : for fault analysis
Standard equipment
Door : fully insulated stainless steel door with 2-point locking (compression door lock)
Internals : 2 stainless steel grid(s), electropolished
Works calibration certificate : incl. works calibration certificate for +37°C
Door : inner glass door
Stainless steel interior
Dimensions : w(A) x h(B) x d(C): 400 x 560 x 330 mm (d less 39 mm for fan)
Interior : easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Volume : 74 l
Max. number of internals : 6
Max. loading of chamber : 120 kg
Max. loading per internal : 20 kg
Textured stainless steel casing
Dimensions : w(D) x h(E) x d(F): 585 x 944 x 514 mm (d +56mm door handle)
Housing : rear zinc-plated steel
Electrical data
Voltage Electrical load : 230 V, 50/60 Hz approx. 1250 W
Voltage Electrical load 115 V, 50/60 Hz approx. 900 W
Ambient conditions
Set Up : The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Altitude of installation : max. 2,000 m above sea level
Ambient temperature : +5 °C to +40 °C
Humidity rh : max. 80 %, non-condensing
Overvoltage category : II
Pollution degree : 2
Packing/shipping data
Transport information : The appliances must be transported upright
Customs tariff number : 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. : DE 66812464
Dimensions approx incl. carton : w x h x d: 730 x 1130 x 670 mm
Net weight : approx. 66 kg
Gross weight carton : approx. 85 kg