ตู้บ่มเพาะเชื้อ Incubator รุ่น IN75, ขนาด 74 ลิตร , ยี่ห้อ MEMMERT

รหัสสินค้า : IN75

Incubator IN75

Standard delivery Incubator

The heating of this incubator is optimally tuned for natural convection and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.

Temperature

Setting temperature range : +20 to +80 °C

Working temperature range : at least 5 above ambient temperature to +80 °C

Setting accuracy temperature : 0.1 °C

Temperature sensor : 1 Pt100 sensor DIN class A in 4-wire-circuit

Control technology

Language setting : German, English, Spanish, French, Polish, Czech, Hungarian

ControlCOCKPIT : SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display

Timer : Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function SetpointWAIT : the process time does not start until the set temperature is reached

Calibration : three freely selectable temperature values

adjustable parameters : temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation

Convection : natural convection

Fresh air : Admixture of pre-heated fresh air by electronically adjustable air flap

Vent : vent connection with restrictor flap

Communication

Documentation : programme stored in case of power failure

Programming : AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

Safety

Temperature control : adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature

Autodiagnostic system ; for fault analysis

Standard equipment

Door : fully insulated stainless steel door with 2-point locking (compression door lock)

Internals : 2 stainless steel grid(s), electropolished

Works calibration certificate : incl. works calibration certificate for +37°C

Door : inner glass door

Stainless steel interior

Interior : easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides

Volume : 74 l

Dimensions : w_(A) x h_(B) x d_(C): 400 x 560 x 330 mm

Max. number of internals : 6

Max. loading of chamber : 120 kg

Max. loading per internal : 20 kg

Textured stainless steel casing

Dimensions : w_(D) x h_(E) x d_(F): 585 x 944 x 514 mm (d +56mm door handle)

Housing : rear zinc-plated steel

Electrical data

Voltage Electrical load : 230 V, 50/60 Hz approx. 1250 W

Voltage Electrical load : 115 V, 50/60 Hz approx. 900 W

Ambient conditions

Set Up : The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.

Altitude of installation : max. 2,000 m above sea level

Ambient temperature : +5 °C to +40 °C

Humidity rh : max. 80 %, non-condensing

Overvoltage category : II

Pollution degree : 2

Packing/shipping data

Transport information : The appliances must be transported upright

Customs tariff number : 8419 8998

Country of origin : Federal Republic of Germany

WEEE-Reg.-No. : DE 66812464

Dimensions approx incl. carton : w x h x d: 730 x 1130 x 670 mm

Net weight : approx. 66 kg

Gross weight carton : approx. 85 kg